万有引力场中挠性联结双体系统的稳定性与分岔

本文讨论受万有引力矩作用沿圆轨道运动的挠性联结双体系统的平面天平动。讨论其相对轨道坐标系的可能平衡状态。利用Ｌｉａｐｕｎｏｖ直接法分析各平衡状态的稳定性。分析表明，当刚度系数足够小时，平衡状态呆产生分岔和稳定性突变。利用参数空间对系统的全局运动性态作出定性的描述。     

多体系统动力学设计灵敏度分析直接微分法

针对受完整约束的多体系统动力学微分／代数方程数学模型动态最优化设计问题，建立了通用的目标函数和约束方程，并以此为基础，用直接微分方法系统地推导出了计算设计灵敏度的通用公式，最后通过平面机械臂模型对理论结果和相应算法进行了验证．     

Subharmonic transition to turbulence in channel flow

A direct numerical simulation of subharmonic transition to turbulence in channel flow has been performed. The stages of primary and secondary instability have been identified in the results leading to a staggered pattern of A-shaped vortices. The associated staggered symmetry has been found to persist up to rather late stages of the breakdown process. This symmetry rapidly disappears in the final stage of transition and a developed turbulent flow is attained. A pronounced difference in the development between the two channel halves is observed which is consistent with the predictions of secondary instability theory.     

Correct Solutions of Plane Elastic Problems for a Half-Plane

Continuous and integrable solutions and one-to-one relationships between boundary forces and displacements are found through the direct integration of the differential equations of the plane elastic problem for a half-plane with boundary conditions for either forces or displacements or with mixed boundary conditions. The necessary equilibrium conditions for forces and the compatibility conditions for displacements that ensure the correctness of the solutions are formulated     

18O同位素标记定量肽段串联体蛋白质结合同位素稀释-多反应监测质谱的蛋白质绝对定量新方法

建立了定量肽段串联体蛋白质(concatamers of Q peptides, QconCATs)结合¹⁸O同位素标记-多反应监测质谱的蛋白质绝对定量新方法。首先对QconCAT重组蛋白质进行了纯度表征,十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)表征结果表明重组蛋白质的纯度在99%以上,相对分子质量约为63.4 kDa。对QconCAT重组蛋白质酶切后的肽段混合物进行质谱分析,并经pFind和pLabel软件处理,验证了目标肽段。还考察了QconCAT重组蛋白质的酶切效率和¹⁸O标记效率,并对QconCAT蛋白质结合¹⁸O标记-同位素稀释-多反应监测质谱方法进行了评价。实验结果表明,采用该方法对腾冲嗜热厌氧菌(Thermoanaerobacter tengcongensis, TTE)中选定蛋白质的肽段进行绝对含量测定时,相对标准偏差小于20%,准确度较高,说明该方法可用于复杂生物样本中蛋白质的绝对定量。更重要的是所建方法不仅解决了细胞培养氨基酸稳定同位素标记(SILAC)技术的重标试剂价格昂贵的问题,也为定量蛋白质组学提供了一种新的方法。     

Fluorinated Porous Poly(spirobifluorene) Via Direct C‒H Arylation: Characterization,Porosity, and Gas Uptake

Considering intrinsic properties of conjugated polyfluorenes and special functions of porous polymers, synthesis of fluorinated porous poly(spirobifluorene) via direct C?H arylation polycondensation is explored. Owing to the contorted structure and cross-linking nature, the obtained polymer FPSBF shows permanent porosities with Brunauer–Emmett–Teller specific surface area up to 700 m² g^?1 and exhibits a narrow pore size distribution with the dominant pore size at about 0.63 nm, which is more suitable for adsorption of small gas molecules. Based on the measured gas physisorption isotherms with pressure up to 1.13 bar, the obtained polymer shows good uptaking capacities for hydrogen (1.30 wt% at 1.0 bar and 77 K) and methane (4.80 wt% 1.0 bar and 273 K). Moreover, FPSBF has significant adsorption selectivity for CH₄ against N₂ and the estimated ideal adsorption selectivity ratio is up to 30/1 at 1.0 bar and 273 K, which makes the material possess potential application in gas separation.     

Cure Kinetics of Poly(acrylonitrile-butadiene-styrene) Modified Epoxy–Amine System

The cure kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA) modified with different amounts of poly(acrylonitrile-butadiene-styrene) (ABS) and cured with 4,4′-diaminodiphenylsulfone (DDS) was investigated by employing differential scanning calorimetry (DSC). The curing reaction was followed by using an isothermal approach over the temperature range 150–180°C. The amount of ABS in the blends was 3.6, 6.9, 10 and 12.9 wt%. Blending of ABS in the epoxy monomer did not change the reaction mechanism of the epoxy network formation, but the reaction rate seems to be decreased with the addition of the thermoplastic. A phenomenological kinetic model was used for kinetic analysis. Activation energies and kinetic parameters were determined by fitting the kinetic model with experimental data. Diffusion control was incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The reaction rates for the epoxy blends were found to be lower than that of the neat epoxy. The reaction rates decreased when the ABS contents was increased, due to the dilution effect caused by the ABS on the epoxy/amine reaction mixture.     

粮谷中8种痕量真菌毒素的定量分析方法

建立了大米、小麦和大豆中黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2、伏马毒素B1、伏马毒素B2、柄曲霉素和异烟棒曲霉素C 8种真菌毒素的高效液相色谱-串联质谱(HPLC-MS/MS)分析方法。样品加入正己烷去除油脂,用60%乙腈振荡液液分配提取,取乙腈水层过滤膜后分析。在电喷雾电离(ESI)正离子模式下采用多反应监测(MRM)进行测定。定量方法采用同位素内标稀释法,8种真菌毒素在各自浓度范围内线性关系良好,线性系数均不低于0.997 0。空白样品的加标回收率为77%～123%,相对标准偏差(RSD)为0.6%～13.3%。该方法操作简单、灵敏度高,可用于粮谷中真菌毒素的检测。     

稀释剂对H2/CH4预混火焰熄灭特性影响

掺氢天然气在稀释气体作用下的熄灭特性研究对实际燃烧设备的设计和优化具有重要的指导意义。本文利用对冲火焰法测量了掺氢天然气层流火焰在N₂和CO₂作用下的熄灭拉伸率,并采用数值模拟耦合详细化学反应机理对N₂,CO₂和He的稀释剂效应展开研究。结果表明,Li、GRI Mech 3.0和FFCM-1机理均能定性反映燃料熄灭拉伸率随当量比的变化规律,且FFCM-1机理综合预测精度最高。实验和模拟发现,不同稀释剂气体对掺氢天然气熄灭拉伸率降低幅度满足:He22。进一步研究发现,CO₂由于热容大,在反应体系中会降低火焰温度,同时增强了链终止反应强度,通过热效应和化学效应两方面对火焰熄灭特性起作用。He则能显著改变燃料混合物的平均摩尔质量,从而改变体系中重要反应物和自由基的扩散特性,从扩散效应方面影响火焰的熄灭特性。